SIP-1 (AMKA AXKA NFA2X SAX ABC)

◄This type of product is always under the order. When ordering, please pay special attention to the item "Specifications", which you will find below on the page. ORDER
◄ Product and price information ASK  
We also invite you to visit our online store at:
 
  1. SIP-1 (AMKA AXKA NFA2X SAX ABC)
  2. SIP-2 (AMKA AXKA NFA2X SAX ABC)
  3. SIP-3 (AMKA AXKA NFA2X SAX ABC)
  4. SIP-4 (AMKA AXKA NFA2X SAX ABC)
  5. WIRE OF TYPE A (AAC )
  6. WIRE OF TYPE AC (ACSR)
 
 
1. SIP-1 (AMKA AXKA NFA2X SAX ABC)    ASK    ORDER
 

FUNCTION:

Self-supporting shielded wire designed for trunks of overhead transmission lines and line branching from overhead transmission lines in the atmosphere of air types I and II according to State Standard 15150-69.

  

DESIGN:

  1. Phase conductor – aluminium, circular, multiwire, compacted.
  2. Carrier conductor – circular, multiwire, compacted from aluminium alloy or aluminium, reinforced with steel wire.
  3. Insulation of phase conductor from light-stabilized cross-linked polyethylene, neutral carrier conductor – not insulated.

SERVICE AND ASSEMBLY CONDITIONS:

Admissible heating of conductor during operation in normal conditions – not over 90°C
Admissible heating of conductor in case of a short circuit – not over 250°C
Environment temperature, from -60 to 50°C
It is recommended to carry out assembly at an environment temperature not lower than 20°C
Bending radius during assembly – not less than 10 diameters of the wire
Service life – 40 years
Warranty period – 3 years
REGULATIONS:   TU 16-705.500-2006; TU BY 400424686.006-2008
 
 
2.SIP-2(AMKA AXKA NFA2X SAX ABC)    ASK    ORDER
 

FUNCTION:

Self-supporting shielded wire with current-carrying conductor from aluminium alloy designed for trunks of overhead transmission lines and line branching from overhead transmission lines in the atmosphere of air types I and II according to State Standard 15150-69, including seashores, salinas,
industrial regions and areas with saline sands.

   

DESIGN:

  1. Phase conductor – aluminium, circular, multiwire, compacted.
  2. Carrier conductor – circular, multiwire, compacted from aluminium alloy or aluminium, reinforced with steel wire.
  3. Insulation of phase and carrier conductors is from light-stabilized cross-linked polyethylene.

SERVICE AND ASSEMBLY CONDITIONS:

Admissible heating of conductor during operation in normal conditions – not over 90°C
Admissible heating of conductor in case of a short circuit – not over 250°C
Environment temperature, from -60 to 50°C
It is recommended to carry out assembly at an environment temperature not lower than 20°C
Bending radius during assembly – not less than 10 diameters of the wire
Service life – 40 years
Warranty period – 3 years
REGULATIONS:  TU 16-705.500-2006; TU BY 400424686.006-2008
 
 
3. SIP-3 (AMKA AXKA NFA2X SAX ABC)    ASK    ORDER
 

FUNCTION:

The wire is designed for overhead transmission lines at nominal voltage 10-35 kV in the atmosphere of air types I and II according to State Standard 15150-69, including seashores, salinas, industrial regions and areas with saline sands.

  

DESIGN:

  1. Current-carrying conductor - circular, multiwire, compacted from aluminium alloy or aluminium, reinforced with steel wire.
  2. Insulation of current-carrying conductor is from light-stabilized cross-linked polyethylene.

SERVICE AND ASSEMBLY CONDITIONS:

Admissible heating of conductor during operation in normal conditions – not over 90°C
Admissible heating of conductor in case of short circuit – not over 250°C
Environment temperature, from -60 to 50°C
It is recommended to carry out assembly at an environment temperature not lower than 20°C
Bending radius during assembly – not less than 10 diameters of the wire
Service life – 40 years
Warranty period – 3 years
REGULATIONS:  TU 16-705.500-2006; TU BY 400424686.006-2008
 
 
4. SIP-4 (AMKA AXKA NFA2X SAX ABC)   ASK    ORDER
 

FUNCTION:

Self-supporting wire without carrier element, designed for overhead transmission lines branching to the lead-in and for installation on the walls of buildings and engineering structures in the atmosphere of air types I and II according to State Standard 15150-69.

  

DESIGN:

  1. Phase conductors from aluminium with insulation from light-stabilized crosslinked polyethylene without neutral (carrier) conductor.
  2. Phase conductors are compacted.

SERVICE AND ASSEMBLY CONDITIONS:

Admissible heating of conductor during operation in normal conditions – not over 90°C
Admissible heating of conductor in case of a short circuit – not over 250°C
Environment temperature, from -60 to 50°C
It is recommended to carry out assembly at an environment temperature not lower than 20°C
Bending radius during assembly – not less than 10 diameters of the wire
Service life – 40 years
Warranty period – 3 years
REGULATIONS: TU 16-705.500-2006; TU BY 400424686.006-2008
 
 
5. WIRE OF TYPE A (AAC )    ASK    ORDER
 

FUNCTION:

Electricity transmission in overhead electrical networks on the grounds of all macroclimatic regions with moderate and frigid climate.

  

DESIGN:

  1. Multiwire, twisted from hard aluminium wires.

SERVICE AND ASSEMBLY CONDITIONS:

Installation is carried out in the air on the supports of power lines in compliance with technical operation instructions of electrical installations electric power plants and networks.
Operating temperature – from -60°C to 40°C.
Admissible continuous temperature during operation – not over 90°C.
Service life – not less than 45 years.
REGULATIONS:  State Standard 839-80
 
 
6. WIRE OF TYPE AC (ACSR)    ASK    ORDER
 

FUNCTION:

Electricity transmission in overhead electrical networks on the grounds of all macroclimatic regions with moderate and frigid climate.

  

DESIGN:

  1. Multiwire, twisted from hard aluminium wires.

FEATURES:

The peculiarity of wires of AC type is that there’s a central carrier core from a single or twisted steel
corrugated wires in them.

SERVICE AND ASSEMBLY CONDITIONS:

Installation is carried out in the air on the supports of power lines in compliance with technical operation instructions of electrical installations electric power plants and networks.
Operating temperature – from -60°C to 40°C.
Admissible continuous temperature during operation – not over 90°C.Service life – not less than 45 years. 
REGULATIONS: State Standard 839-80

 

}

TOP PAGES

uCoz